1. Which subflooring panels creates the just rigid subflooring? a. Plywood a. Oriented strand board (OSB) c. Tongue-and-groove plywood d. 1times 6boards areas where termites are a pr metal shield should be installed problem, a a. ontop the sit footing 1. on top of the footing c. between the sill plate and rim joist d. under the bottom wall plate 2. downward deflection at the center live load. downwa exceed t the cente a live load, must not exceed a.Vasth of the span b. Yanth of the span c. Yaoth of the span d. Yisoth of the span 27. When laying out the sill for joist locations 16^circ OC the first measurement on the sill should be at a. 141/4'' b. 15% '' c. 16'' d. 151/4'' 28. Use special nails when fastening treated lumber, because treatment chemicals can cause ordinary fasteners to a. become brittle b. corrode c. stain the wood d. shrink 29. The first floor should not be framed before the foundation is backfilled to allow the foundation to flex. a. True b. False

Question

1. Which subflooring panels creates the just rigid subflooring? a. Plywood a. Oriented strand board (OSB) c. Tongue-and-groove plywood d. 1times 6boards areas where termites are a pr metal shield should be installed problem, a a. ontop the sit footing 1. on top of the footing c. between the sill plate and rim joist d. under the bottom wall plate 2. downward deflection at the center live load. downwa exceed t the cente a live load, must not exceed a.Vasth of the span b. Yanth of the span c. Yaoth of the span d. Yisoth of the span 27. When laying out the sill for joist locations 16^circ OC the first measurement on the sill should be at a. 141/4'' b. 15% '' c. 16'' d. 151/4'' 28. Use special nails when fastening treated lumber, because treatment chemicals can cause ordinary fasteners to a. become brittle b. corrode c. stain the wood d. shrink 29. The first floor should not be framed before the foundation is backfilled to allow the foundation to flex. a. True b. False

Answer 1

1. Which subflooring panels create the most rigid subflooring?c. Tongue-and-groove plywood22. In areas where termites are a problem, a metal shield should be installed:a. on top of the sill footing23. Building codes specify that, with a live load, downward deflection at the center of a joist must not exceed:b. 1/360th of the span27. When laying out the sill for joist locations 16" OC, the first measurement on the sill should be at:d. 15 1/4"28. Use special nails when fastening treated lumber, because treatment chemicals can cause ordinary fasteners to:b. corrode29. The first floor should not be framed before the foundation is backfilled to allow the foundation to flex.a. True

Problemas

Roztwór

Respuesta