Place the steps for jumping a car battery in the correct order. Park a functioning car as close as possible to the dead car without the two cars touching. Clamp the red cable to the red/positive terminal of the dead car. Attach the last black/negative to an unpainted piece of metal (not aluminum). Attach the black cable to the black/negative terminal of the live car. Turn the live car on and push the gas very lightly, giving juice over to the dead battery. Once the receiving car has started, remove cables in the opposite order they were placed. Attach the other red cable to the red/positive part of the live car.

Question

Place the steps for jumping a car battery in the correct order. Park a functioning car as close as possible to the dead car without the two cars touching. Clamp the red cable to the red/positive terminal of the dead car. Attach the last black/negative to an unpainted piece of metal (not aluminum). Attach the black cable to the black/negative terminal of the live car. Turn the live car on and push the gas very lightly, giving juice over to the dead battery. Once the receiving car has started, remove cables in the opposite order they were placed. Attach the other red cable to the red/positive part of the live car.

Answer 1

1. Park a functioning car as close as possible to the dead car without the two cars touching.2. Attach the other red cable to the red/positive part of the live car.3. Attach the black cable to the black/negative terminal of the live car.4. Attach the last black/negative to an unpainted piece of metal (not aluminum).5. Turn the live car on and push the gas very lightly, giving juice over to the dead battery.6. Once the receiving car has started, remove cables in the opposite order they were placed.7. Attach the red cable to the red/positive terminal of the dead car.8. Attach the black cable to the black/negative terminal of the dead car.

Answer 2

## Step 1: Park a functioning car as close as possible to the dead car without the two cars touching. This is the first step in the process of jumping a car battery. The functioning car is referred to as the "live" car.## Step 2: Attach the other red cable to the red/positive part of the live car. This is the second step in the process. The red cable is attached to the positive terminal of the live car.## Step 3: Attach the black cable to the black/negative terminal of the live car. This is the third step in the process. The black cable is attached to the negative terminal of the live car.## Step 4: Attach the last black/negative to an unpainted piece of metal (not aluminum). This is the fourth step in the process. The black cable is attached to an unpainted piece of metal on the dead car.## Step 5: Turn the live car on and push the gas very lightly, giving juice over to the dead battery. This is the fifth step in the process. The live car is started and the gas is pushed lightly to provide power to the dead battery.## Step 6: Once the receiving car has started, remove cables in the opposite order they were placed. This is the sixth step in the process. The cables are removed in the opposite order they were attached.## Step 7: Attach the red cable to the red/positive terminal of the dead car. This is the seventh step in the process. The red cable is attached to the positive terminal of the dead car.## Step 8: Attach the black cable to the black/negative terminal of the dead car. This is the eighth step in the process. The black cable is attached to the negative terminal of the dead car.

Problemas

Roztwór

Respuesta

Explicación