Problemas
If the vehicle is beginning to understeer,oversteer, or roll, the EBCM will detect it in the __ Select one: a. Signal values b. Brake pedal c. HCU d. Master cylinder
Roztwór
Julio
veterano · Tutor durante 12 años
4.1
(265 Votos)
Respuesta
The correct answer is 'a. Signal values'. The EBCM detects changes in the brake pedal position, which is a signal value, to determine if the vehicle is beginning to understeer, oversteer, or roll.
Explicación
## Step 1The problem is about the Electronic Brake Control Module (EBCM), a component in the braking system of a vehicle. The EBCM is responsible for controlling the brake force in each wheel to ensure the vehicle's stability during braking.## Step 2The EBCM monitors various signals from the vehicle's braking system, including the brake pedal position, wheel speed, and other related parameters. These signals are crucial for the EBCM to determine the appropriate brake force for each wheel.## Step 3The EBCM does not directly detect understeer, oversteer, or rolling conditions based on the brake pedal, HCU (Hydraulic Control Unit), or master cylinder alone. Instead, it relies on the signals it receives from various sensors in the vehicle.## Step 4The brake pedal position is a critical input for the EBCM. When the driver applies the brake pedal, the EBCM receives this signal and adjusts the brake force accordingly. If the vehicle begins to understeer, oversteer, or roll, the EBCM can detect changes in the brake pedal position and take corrective action by adjusting the brake force to individual wheels.