Problemas
What should a welder do to the measurement between the welding machine and the workpiece to select the correct welding cable size? halve the value multiply by the duty cycle divide by the electrode diameter double the value
Roztwór
Sergio
professionell · Tutor durante 6 años
4.1
(279 Votos)
Respuesta
The correct answer is 'A', which corresponds to halving the value.
Explicación
## Step 1The problem is asking for the correct method a welder should use to select the appropriate welding cable size based on the distance between the welding machine and the workpiece. The options provided are: halving the value, multiplying by the duty cycle, dividing by the electrode diameter, and doubling the value.## Step 2The correct method is to halve the value. This is because the welding cable size is typically determined by the distance between the welding machine and the workpiece. Halving the value ensures that the cable size is sufficient to carry the current without overheating.## Step 3The other options, such as multiplying by the duty cycle, dividing by the electrode diameter, or doubling the value, are not standard methods for determining welding cable size. The duty cycle is a measure of the welding machine's operating time relative to a 10-minute period, and the electrode diameter is a characteristic of the electrode used in welding, not the welding cable. Doubling the value could result in an excessively large cable, which is not necessary and could be inefficient or even dangerous.