Problemas
a.) During a routine automatic transmission fluid and filter change, a technician finds a very large quantity of metal particles in the pan. The technician s A. switch to synthetic fluid. CB. install an auniliary cooler. OC. note the condition on the work order. OD. back flush the transmission
Roztwór
Marco
professionell · Tutor durante 6 años
4.3
(154 Votos)
Respuesta
The correct answer is 'C'. The technician should note the condition on the work order. This ensures that the condition of the transmission is documented and can be addressed in the future.
Explicación
## Step 1The problem presents a situation where a technician finds a large quantity of metal particles in the pan during a routine automatic transmission fluid and filter change. The options provided are potential responses to this situation.## Step 2Option A suggests switching to synthetic fluid. However, this does not address the issue of metal particles in the pan. Synthetic fluid is a type of fluid that can be used in various applications, but it does not solve the problem of metal particles in the transmission.## Step 3Option B suggests installing an auxiliary cooler. This is a method to improve the cooling efficiency of the transmission, but it does not address the issue of metal particles in the pan.## Step 4Option C suggests noting the condition on the work order. This is a standard procedure in any repair or maintenance job. It ensures that the condition of the transmission is documented and can be addressed in the future.## Step 5Option D suggests back flushing the transmission. This is a method to remove old fluid and debris from the transmission, but it does not address the issue of metal particles in the pan.