5. If the filler rod is withdrawn too far from the torch, it will become too cold and chill the puddle when it is again inse close to the flame of the torch, it will become too hot and if it should become molten, drops of molten filler rod wi being welded. Such a condition will result in a very uneven bead and probably poor penetration of the weld. According to the above paragraph, __ The blank is best filled by the following. A. a too rapid withdrawal will chill the puddle B. excessive gas pressure will blow drops from the filler rod C. the distance between the torch and the filler rod will effect the weld D. a too slow withdrawal from the puddle will overheat the filler rod

Question

5. If the filler rod is withdrawn too far from the torch, it will become too cold and chill the puddle when it is again inse close to the flame of the torch, it will become too hot and if it should become molten, drops of molten filler rod wi being welded. Such a condition will result in a very uneven bead and probably poor penetration of the weld. According to the above paragraph, __ The blank is best filled by the following. A. a too rapid withdrawal will chill the puddle B. excessive gas pressure will blow drops from the filler rod C. the distance between the torch and the filler rod will effect the weld D. a too slow withdrawal from the puddle will overheat the filler rod

Answer 1

C. the distance between the torch and the filler rod will affect the weldThe paragraph discusses how the position of the filler rod relative to the torch affects the welding process, indicating that maintaining the correct distance is crucial for a good weld.

Problemas

Roztwór

Respuesta