Pagina de inicio
/
Tecnología
/
GMET Computer Company Hardware lastallation Instructions: CPU memory modules, & video card In order to avoid an electrical charge, place the motherboard on a rubberized pad on a wooden table. Check the pins of the Central Processing Unit (CPU) to be sure they are not bent Match the pins to the Zero Insertion Force socket by orienting the marked pin with a notch in the socket. The CPU should slide into place without force The processor may already have the heat sink and fan attached to it, so attach both parts simultaneously. Press down on the lever to lock it in place Next, the memory sticks and video card are installed. When inserting the memory modules, use slots one and two on the motherboard. Be sure to pick up the memory sticks by the edges.Press the sticks into the slots until the ejector clips lock. If the memory modules are not locked into place, the motherboard will produce an audible beep when the system is turned on. Next, the video card (AGP type) is placed in the expansion slot, which is usually brown and the uppermost slot on the motherboard. Gently work the video card Into place Last, test the assembly by plugging the unit into the power supply.Also attach it to a test monitor to be sure that there is power to the system and a blowing fan. The video screen should display the Basic Input/Output System (BIOS). This shows that the CPU installation was successful and the CPU, memory modules.and video card are recognized __ You work at GMET Computer Company. You have completed the hardware installation and when you test the system, the fan blows, the motherboard beeps, and there is no BIOS display on the video screen. Based on the instructions shown, what is the problem? A The CPU does not have a heat sink and fan attached to it B The memory sticks are not pushed in enough and locked into place C The motherboard is not grounded against an electrical charge by being placed on a rubberized pad D The video card is not the AGP type. E. The video card is placed in the wrong slot in the motherboard

Problemas

GMET Computer Company Hardware lastallation Instructions: CPU memory modules, & video card In order to avoid an electrical charge, place the motherboard on a rubberized pad on a wooden table. Check the pins of the Central Processing Unit (CPU) to be sure they are not bent Match the pins to the Zero Insertion Force socket by orienting the marked pin with a notch in the socket. The CPU should slide into place without force The processor may already have the heat sink and fan attached to it, so attach both parts simultaneously. Press down on the lever to lock it in place Next, the memory sticks and video card are installed. When inserting the memory modules, use slots one and two on the motherboard. Be sure to pick up the memory sticks by the edges.Press the sticks into the slots until the ejector clips lock. If the memory modules are not locked into place, the motherboard will produce an audible beep when the system is turned on. Next, the video card (AGP type) is placed in the expansion slot, which is usually brown and the uppermost slot on the motherboard. Gently work the video card Into place Last, test the assembly by plugging the unit into the power supply.Also attach it to a test monitor to be sure that there is power to the system and a blowing fan. The video screen should display the Basic Input/Output System (BIOS). This shows that the CPU installation was successful and the CPU, memory modules.and video card are recognized __ You work at GMET Computer Company. You have completed the hardware installation and when you test the system, the fan blows, the motherboard beeps, and there is no BIOS display on the video screen. Based on the instructions shown, what is the problem? A The CPU does not have a heat sink and fan attached to it B The memory sticks are not pushed in enough and locked into place C The motherboard is not grounded against an electrical charge by being placed on a rubberized pad D The video card is not the AGP type. E. The video card is placed in the wrong slot in the motherboard

GMET Computer Company Hardware lastallation Instructions: CPU memory modules, & video card In order to avoid an electrical charge, place the motherboard on a rubberized pad on a wooden table. Check the pins of the Central Processing Unit (CPU) to be sure they are not bent Match the pins to the Zero Insertion Force socket by orienting the marked pin with a notch in the socket. The CPU should slide into place without force The processor may already have the heat sink and fan attached to it, so attach both parts simultaneously. Press down on the lever to lock it in place Next, the memory sticks and video card are installed. When inserting the memory modules, use slots one and two on the motherboard. Be sure to pick up the memory sticks by the edges.Press the sticks into the slots until the ejector clips lock. If the memory modules are not locked into place, the motherboard will produce an audible beep when the system is turned on. Next, the video card (AGP type) is placed in the expansion slot, which is usually brown and the uppermost slot on the motherboard. Gently work the video card Into place Last, test the assembly by plugging the unit into the power supply.Also attach it to a test monitor to be sure that there is power to the system and a blowing fan. The video screen should display the Basic Input/Output System (BIOS). This shows that the CPU installation was successful and the CPU, memory modules.and video card are recognized __ You work at GMET Computer Company. You have completed the hardware installation and when you test the system, the fan blows, the motherboard beeps, and there is no BIOS display on the video screen. Based on the instructions shown, what is the problem? A The CPU does not have a heat sink and fan attached to it B The memory sticks are not pushed in enough and locked into place C The motherboard is not grounded against an electrical charge by being placed on a rubberized pad D The video card is not the AGP type. E. The video card is placed in the wrong slot in the motherboard

Solución

avatar
Octaviomaestro · Tutor durante 5 años
expert verifiedVerificación de expertos
4.5 (192 votos)

Responder

B. The memory sticks are not pushed in enough and locked into place.

Explicar

## Step 1<br />The problem presents a situation where a computer system is assembled and tested, but the Basic Input/Output System (BIOS) does not display on the video screen. The system's fan is blowing, the motherboard is beeping, and the CPU, memory modules, and video card are recognized by the system.<br /><br />## Step 2<br />The problem provides several potential issues that could cause this situation. These include the CPU not having a heat sink and fan attached to it, the memory sticks not being pushed in enough and locked into place, the motherboard not being grounded against an electrical charge by being placed on a rubberized pad, the video card not being the AGP type, and the video card being placed in the wrong slot in the motherboard.<br /><br />## Step 3<br />The problem also provides a set of instructions for assembling a computer system. These instructions include placing the motherboard on a rubberized pad, checking the pins of the CPU, inserting the memory modules, inserting the video card, and testing the system.<br /><br />## Step 4<br />Based on the instructions and the situation described in the problem, the most likely cause of the BIOS not displaying on the video screen is that the memory sticks are not pushed in enough and locked into place. This is because the instructions specify that the memory sticks should be pushed into the slots until the ejector clips lock. If they are not locked into place, the motherboard will produce an audible beep when the system is turned on.
Haz clic para calificar: