Ayuda para tareas de ingeniería

Diseñado para ingenieros estructurales de primera línea que trabajan en el campo, la ayuda de asignación de ingeniería espera ayudar a los ingenieros de todos los campos en su trabajo.

Contiene varias ayudas de cálculo, procesos de cálculo y métodos operativos que son efectivos en el trabajo diario del proceso de cálculo para producir datos rápidamente. Con funciones integrales de cálculo y consulta, los usuarios pueden buscar requisitos operativos relevantes de acuerdo con las necesidades reales y producir valiosos datos de ingeniería.

Question 1 of 37 When projecting geometry from a body onto a sketch, which plane is the geometry projected onto? A. The active sketch plane B. The current viewpoint C. The face of the body being projected D. The Home view

1. Carbon dioxide __ (is or is not)effective on Class B and Class C fires. 2. Halogenated hydrocarbons are identified through a system of __ numbers. 3. Two typical inspection items for portable fire extinguishers are: a. __ b. __ 4. HRD extinguishing systems are discharged by an electrically ignited discharge cartridge called a __ 5. If an installed fire extinguishing system has been discharged by normal operation the __ (red or yellow) blowout disk will be ruptured. 6. Almost all type of fire extinguisher containers require __ to determine the amount of extinguishing agent. 7. Fire extinguisher containers must be hydrostatically tested every __ years. 8. If a discharge cartridge is removed from a discharge valve,it __ (may or may not)be used in another discharge valve assembly.

Of the following which are the most common parts changed in a plasma torch? electrode and nozzle retaining cup and gas swirl ring electrode and workpiece clamp workpiece clamp and retaining cup

Of the following which is sometimes equipped on some light-duty PAC equipment? water tank air compressor argon gas cylinder battery-operated power supply

What should be clone after gas cylleders are disconnected from a plasma-are cutting unit before it is stored? replace the collnder caps lay all cylinders down on their side install a cap on the regulator cuttet set the regulator to Its maximum setting