Ayuda para la tarea empresarial
Escribir una tarea comercial estándar nunca es una tarea fácil para la mayoría de los jóvenes. Requiere una buena comprensión del tema de la tarea, el tipo de negocio y la dirección; además de desarrollar el esquema perfecto y el marco de contenido para la tarea y ponerse manos a la obra de escribir el cuerpo del texto, así como corregir el texto en una etapa posterior.
Por lo tanto, a menudo buscan ayudantes profesionales para sus tareas para obtener buenas ideas. Ya sea escribiendo algunas instrucciones a la IA para obtener el marco del artículo o pidiéndole ayuda para obtener temas atractivos. Puede elegirnos para desarrollar soluciones de calidad inigualable al instante.
- 1. You ordered a new phone online, and it arrived in a box with cracked corners and damaged packaging. The phone inside is fine, but you wonder how it got here in that condition. How would you handle this situation to ensure that packages are handled better in the future? What steps could you take when receiving a fragile package? __
- To: Engineering Dept. Subject: Custom Order from ISAE:Industries Widely dissimilar industries have recently discovered the advantage of custom overstock cantilever racks As a result, demand for custom orders has been escalating. An occasional although satisfied customer, ISAE Industries, is well aware of our reputation for quality and is currently weighing our quality, price and production time against that of our competitors. ISAE has recently acquired an on-going order from a national client and consequently, is inaugurating plants and warchouses in three different states next year with the potential augmentation of five distribution warehouses anxially sparning the following eight years The warehouses will peremptonly command thousands of units of rack (and other material handing accoutrement) to fulfill the demands engendered by the order. Design requirements must be calculated for nonstock cantilever rack. Two different sets of specifications must be met, but the arms on both must have a bearing capacity of at least 2 ton per pair. Both must be modular so that, in the future, collateral units may be appended to existing units. First set requirements: The single-sided uprights must be 81/2 feet in height and the arms must extend 63/4 feet. The arms must have no lip. The braces must maintain a distance of 5 feet between uprights (measured on center) so that forklifts can move freely between the bases to load and remove sheet and plate onto and from the extended arms. Each upright will support four arms. Second set requirements: The double-sided uprights must be 20 feet in height with six 41/2 foot arms extending from one side and five 51/2 foot arms extending from the other.The arms must end with a vertical restraining lip that protrudes no more than 1 inch. The uprights must be 6 feet apart (measured on center)so that channel and angle bar stock may be loaded and unloaded easily over the arms. If satisfied with the cantilever rack, the customer will provide specifications for hand and platform trucks needed to convey unwieldy materials. You work in the Engineering Department. As it is used in the document shown, cantilever rack is: A a storage unit with access unobstructed by supports. B. a warehouse unit with solid shelves. C. a made-to-order material handing apparatus. D. the pair of arms that extends from a forklift. E. the set of uprights that supports a restraining lip brace
- To: Engineering Dept. Subject: Custom Order from ISAE Industries Widely dissimilar industries have recently discovered the advantage of custom overstock cantilever racks As a result, demand for custom orders has been escalating. An occasional although satisfied customer, ISAE Industries, is well aware of our reputation for quality and is currently weighing our quality, price and production time against that of our competitors. ISAE has recently acquired an on-going order from a national client and consequently, is inaugurating plants and warehouses in three different states next year with the potential augmentation of five distribution warehouses annually sparning the following eight years The warehouses will peremptonly command thousands of units of rack (and other material handing accourtement) to fulfill engendered by the order. Design requirements must be calculated for nonstock cantilever rack. Two different sets of specifications must be met, but the arms on both must have a bearing capacity of at least 2 ton per pair.Both must be modular so that, in the future, collateral units may be appended to existing units. First set requirements: The single-sided uprights must be 8^1/2 feet in height and the arms must extend 61/4 feet. The arms must have no lip. The braces must maintain a distance of 5 feet between uprights (measured on center) so that forklifts can move freely between the bases to load and remove sheet and plate onto and from the extended arms. Each upright will support four arms. Second set requirements: The double-sided uprights must be 20 feet in height with six 41/2 foot arms extending from one side and five 51/2 foot arms extending from the other.The arms must end with a vertical restraining lip that protrudes no more than 1 inch. The uprights must be 6 feet apart (measured on center) so that channel and angle bar stock may be loaded and unloaded easily over the arms. If satisfied with the cantilever rack, the customer will provide specifications for hand and platform trucks needed to convey unwieldy materials. You are reviewing a drawing done by your Engineering Department for the ISAE order. Based on the document shown which of the following specifications, if any, does NOT meet ISAE's requirements for one of the units? A Each pair of arms on the unit can hold 2.5 tons. B. The single-sided uprights are 20 feet high C. The unit is designed so that other units can be attached to it. D. The uprights measure 6 feet apart on center E. All of these specifications meet the requirements for at least one of the units.
- To: Engineering Dept. Subject: Custom Order from ISAE Industries Widely dissimilar industries have recently discovered the advantage of custom overstock cantilever racks. As a result, demand for custom orders has been escalating. An occasional although satisfied customer. ISAE Industries, is well aware of our reputation for quality and is currently weighing our quality.price, and production time against that of our competitors. ISAE has recently acquired an on-going order from a national client and.consequently, is inaugurating plants and warehouses in three different states next year with the potential augmentation of five distribution warehouses annually sparning the following eight years.The warehouses will peremptorily command thousands of units of rack (and other material handling accoutrement) to fulfill the emptorily engendered by the order. Design requirements must be calculated for nonstock cantilever rack. Two different sets of specifications must be met, but the arms on both must have a bearing capacity of at least 2 ton per pair.Both must be modular so that, in the future, collateral units may be appended to existing units. First set requirements: The single-sided uprights must be 81/2 feet in height and the arms must extend 63/4 feet. The arms must have no lip. The braces must maintain a distance of 5 feet between uprights (measured on center) so that forklifts can move freely between the bases to load and remove sheet and plate onto and from the will support four arms. Second set requirements: The double-sided uprights must be 20 feet in height with six 41/2 foot arms extending from one side and five 51/2 foot arms extending from the other. The arms must end with a vertical restraining lip that protrudes no more than 1 inch. The uprights must be 6 feet apart (measured on center) so that channel and angle bar stock may be loaded and unloaded easily over the arms. If satisfied with the cantilever rack, the customer will provide specifications for hand and platform trucks needed to convey unwieldy materials. You work in the Engineering Department. Based on the document shown, filling the custom order to ISAE's satisfaction would be to your company's benefit because: A a custom order always brings in more revenue than an order from stock. B. a unit with these specifications could then be added to the stock product line. C. your company needs to enhance its reputation for filling custom orders. D. your company is currently known for poor quality. E. ISAE will need a continuous supply of rack for several years.
- Document A Memorandum of Understanding QQV Invoicing Solutions (QRV)conducted a thorough analysis of XYZ Enterprises' (XYZ)existing invoicing processes and system QQV interviewed all relevant parties documented the data flows within the system, and compiled findings in a report that was submitted to XYZ stakeholders. XYZ reviewed the report and provided feedback. QQV submitted a proposal to contract with XYZ to design, implement, and maintain a customized invoicing system consistent with the client's requirements. Upon review of the proposal XYZ indicated its interest in moving forward with the development of a new invoicing solution to improve organizational operations and gain a stronger competitive edge. QQV will partner with XYZ to design an invoicing solution that will replace the current processes and system. In the next 30 days, Q&V's design team will meet with XYZ's finance and IT departments to define the requirements for the new system. In the next 60 days QQV will submit a draft proposal for the future processes and system. __ Document B To: All Team Leaders From: Ceci Perkins, IT Systems Director Subject: QaV Design Phase XYZ is partnering with QQV to create a new invoicing solution to improve our organizational operations QQV's work will be fully compliant with all of our confidentiality and security policies. Our information secunly team has been instructed to grant their project team full access to our invoicing system. Any and all relevant documentation should be shared with QQV. As a leader, you play a pivotal role in ensuring this project is successful. Your main role in the design phase will be to encourage and support your team's participation. Some employees may be invited to participate on a task force to share their ideas about improving our current system. Anticipate that some employees may be skeptical of or resistant to change If you have any concerns or anticipate employees reluctance to participate, please discuss this with your group's project sponsor. This week, the project sponsor for your group will be reaching out to schedule a meeting with your team. This meeting will discuss the timeline for the design process, your involvement in the project, and what information (if any) is needed from you. Next Thursday, I will host a conference call to discuss the communications plan for this project.Since they have not yet been engaged in this effort, please do not share any details with clients or vendors at this time.You will receive additional notifications from both my team and QQV as we work to define the requirements for the new system. You are a team leader with XYZ. Based on the documents shown, you should not discuss the new invoicing solution project with vendors or clients at this time because: A security policies have not yet been resolved B. they may be skeptical of or resistant to change. C. the task force will inform others when appropriate D. they have not been involved in the initial phases of the project. E. competitors must not know details of the project.
