Ayuda para tareas de ingeniería

Diseñado para ingenieros estructurales de primera línea que trabajan en el campo, la ayuda de asignación de ingeniería espera ayudar a los ingenieros de todos los campos en su trabajo.

Contiene varias ayudas de cálculo, procesos de cálculo y métodos operativos que son efectivos en el trabajo diario del proceso de cálculo para producir datos rápidamente. Con funciones integrales de cálculo y consulta, los usuarios pueden buscar requisitos operativos relevantes de acuerdo con las necesidades reales y producir valiosos datos de ingeniería.

1. The GM EV1 was what type of vehicle? a. Totally electric powered a. Totall-generation hybrid electric vehicle (HEV) c. A series-type HEV d. A parallel-type HEV 2. Which type of hybrid uses 36 to 42 volts? a. Mild hybrid c. Full hybrid b. Medium hybrid d. Strong hybrid 3. Which type of hybrid is capable of propelling the vehicle using just the electric motor? a. BAS type c. Medium hybrid b. Strong (full) hybrid d. Mild hybrid 4. About how fast does a motor-generator crank the internal com- bustion engine? a. About 100 O RPM c. About 150-300RPM b. About 2000 RPM d. About 400-600RPM 5. Which type of hybrid electric design costs the least? a. Strong hybrid design c. Parallel-hybrid design b. Series-hybrid design d. BAS design 6. Which type of hybrid electric vehicle has idle stop operation? a. Strong hybrids only b. Strong, mild, and medium hybrids c. Mild hybrids only d. Medium hybrids only

1. What are the advantages and disadvantages of series-hybrid design? 2. Whattype of hybrid electrical vehicle is a Toyota Prius and Ford Escape hybrid? 3. What are the advantages and disadvantages of mild.medium. and full hybrid vehicles? 4. Why does a BAS system cost less than the other types of hybrid vehicles? 5. What are the four modes of operation of a typical hytrid vehicle?

1. The friction that causes a robot to turn more slowly due to the wheels dragging against the ground is referred to as: a. Skid Steering b. Turning Torque c. Turning Scrub d. Swing Turn

When stacking bags of material that are the same width, how should a worker cross-key the bags? in each tier above 7' every 10 bags high until the stack reaches 4' all the way to the top of the pile

during the Safety Precautions Unit Directions:Answer the following q What are some positive results of using good body mechanics and negative results of using poor body mechanics? square