Ayuda para tareas de ingeniería

Diseñado para ingenieros estructurales de primera línea que trabajan en el campo, la ayuda de asignación de ingeniería espera ayudar a los ingenieros de todos los campos en su trabajo.

Contiene varias ayudas de cálculo, procesos de cálculo y métodos operativos que son efectivos en el trabajo diario del proceso de cálculo para producir datos rápidamente. Con funciones integrales de cálculo y consulta, los usuarios pueden buscar requisitos operativos relevantes de acuerdo con las necesidades reales y producir valiosos datos de ingeniería.

Tech A says that on most modern vehicles the joints are sealed and lubricated for life . so there may be no grease fittings present. Tech B says that you should add grease to the ball joint until all the old grease is pushed out past the rubber boot on the joint.Who is correct? Select one: a. Tech A b. Tech B c. Both A and B d. Neither A nor B

Tech A says that when removing a MacPherson strut assembly from a vehicle, you must use a spring compressor to keep the spring compressed. Tech B says that a spring compressor is used only after the strut assembly has been removed from the vehicle Who is correct? Select one: a. Tech A b. Tech B c. Both Aand B d. Neither Anor B

The vehicle's stabilizer components should be checked __ Select one: a. Every two years or 20,000 miles b. Every 6 to 8 months c. Whenever a vehicle is brought into the shop because of handling concerns or suspension-related noises d. Every 4 years or 40,000 miles

Tech A says that when unloading a suspension where the coil spring or torsion bar is pushing against the lower control arm, a wood block must be placed between the upper control arm and the frame. Tech B says when unloading a MacPherson strut suspension with only a lower control arm, raise the vehicle by the frame , and allow the suspension to hang free. Who is correct? Select one: a. Tech A b. Tech B c. Both A and B d. Neither A nor B

When the driver feels the steering wheel pulling to one side, which of the following should be checked first? Select one: a. Looseness in the suspension system b. Problems in the braking system c. Tire pressure d. Four-wheel alignment